Pilko Tech » Products » Thyro A - Analog SCR Power Controller

Share/Save

Thyro A - Analog SCR Power Controller

Made by: AEG Power Controllers, in Controllers, Furnace Maintenance
/wp-content/uploads/products/aeg/Thyro-A_1A.jpg

The Thyro-A is a communication-capable Thyristor Power Controller. It can be used wherever alternating voltages, alternating currents or outputs in thermal process technology need to be controlled. The Thyro-A has several different control and regulation modes, can easily be connected to process and automation technology, has a high degree of control accuracy and is simple to handle.

Thyro-A ...H1

Thyristor power controller with integrated semiconductor fuse, system bus interface, TAKT and VAR operating modes, synchronization option (in TAKT operating mode with Thyro-Power Manager option) and control modes U, Usup2;. Suitable for 3-phase operation in 3-phase circuit. Suitable for visualization and commissioning software from the Thyro-Tool Family.

Thyro-A ...HRL1

Thyristor power controller with integrated semi conductor fuse, system bus interface, additional 24 DC/AC electronic power supply, signalling relay, load monitoring and analog output, channel separation, with operating modes TAKT and VAR, synchronization option (in operating mode TAKT with Thyro-Power Manager), control modes U, Usup2;, I ,Isup2;. Suitable for the visualization and commissioning software Thyro-Tool Family.

Thyro-A ...H RLP1

Thyristor power controller with integrated semiconductor fuse, system bus interface, additional 24 VDC/AC electronic power supply, signalling relay, load monitoring and analog output, channel separation, with TAKT and VAR operating modes, synchronization option (in operating mode TAKT with Thyro-Power Manager) and control modes U, Usup2;, I ,Isup2; and P. Suitable for visualization and commissioning software Thyro-Tool Family.

Special Features

Integrated semiconductor fuse
Type range 230-600Vs, 16-1500A, single phase, two phase and three phase
Additional electronic supply, therefore also operation with mains voltages up to 0.43 x Unom possible (only ...HRL 1 and ...H RLP1)
Ohmic load and transformer load, as well as load with high Rwarm /Rcold (= 6) peak current limitation of 3 x Inom (only ...H RL1 and ...H RLP1) in operating mode VAR
Soft start function for transformer load
Channel separation, necessary with countervoltage
Load current monitoring (only ...H RL1 and ...H RLP1)
Signalling relay (only ...H RL1 and ...H RLP1)
Analog output (only ...H RL1 and ...H RLP1)
Control modes U, Usup2;; with ...H RL1 additional I, Isup2;, with ...H RLP1 additional P
Operating modes TAKT, VAR and QTM (with Thyro-A 1A)
Synchronization option (for TAKT: with Thyro-Power Manager, for QTM: with internal mains load optimization)
Triggering with analog setpoint via PC or optional bus adapter
System interface standard
Safe isolation in acc. with EN 50178 ch. 3
UL approval (for standard devices 16 ? 350A, 495-1500A in preparation)
Connection for optional visualization and commissioning software Thyro-Tool Family (via PC-Interface RS232)

Options:

Connection to various bus systems, e.g. Profibus DPV1, Modbus RTU) DeviceNet, CANopen, ProfiNet. Other bus systems on request.
PC-Interface and THYRO-TOOL FAMILY (visualization and commissioning software)